I have found a video on Youtube from General Splatton and tried it with some changes, you can find the video here.
Step 1: What you need
- The plastic is from a empty water bottle
- A one inch circle cutter (got mine form ebay)
- a permanent marker
- a thin marker
- waywatcher green glaze from GW
- Ceramite or White Scar from GW
- Green Fluo from Vallejo
- Matt Varnish from Vallejo
Just empty a bottle of water and cut some plastic. Then you simply use the circle cutter and you have a nice piece of round plastic 🙂
Take of the plug from the permanent marker and draw the inner circle with the thin one,like shown on the picture.
Paint a coat of matt varnish on the front and the backside, but just on the outer ring and let it dry. The glaze will have a much better hold on it.
Paint three coats of Waywatcher Green Glaze on the front of the outer ring and one on the backside of your spelldisc. After that you can wipe off the green marker with a tissue.
Paint Runes from your faction with a white colour. i used some runes from the faction font. You can find it here
After the White runes are dry i have painted over them with some green fluo.
Cut a hole with a knife, like i did on the first picture, so that you can fit the spelldisc onto the hand of your caster, and you should be done!
I hope you find it useful 🙂 greets MiNDmaZing